Teckin SP22

esp8266 eu Comes with ESPHome plug

GPIO Pinout

Based on information from Tasmota.

PinFunction
GPIO01Button
GPIO03Status LED - Red
GPIO04cf_pin bl0937
GPIO05cf1_pin bl0937
GPIO12sel_pin bl0937
GPIO13Status LED - Blue
GPIO14Relay

Basic Configuration

The sample provided below is a minimal config which should get you up and running. You will need to calibrate the power monitoring sensors in order to have accurate power monitoring.

esphome:
  name: sp22
  friendly_name: Teckin SP22
esp8266:
  board: esp01_1m
  
# Enable logging
logger:
api:
  encryption:
    key: !secret api_encryption_key
web_server:
  port: 80
ota:
  password: !secret esp_ota_pass
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: SP22_AP
    password: "Hotspot password here"
captive_portal:
switch:
  - id: relay
    platform: gpio
    name: "Relay"
    pin: GPIO14
    on_turn_on:
      - output.turn_on: relay_status
    on_turn_off:
      - output.turn_off: relay_status
binary_sensor:
  - platform: gpio
    id: button
    internal: true
    pin:
      number: GPIO01
    on_press:
      - switch.toggle: relay
    filters:
      - delayed_on: 10ms
      - delayed_off: 10ms
status_led:
  pin:
    number: GPIO13
    inverted: true
light:
  - platform: binary
    internal: true
    name: "Relay Status"
    output: relay_status
output:
  - id: relay_status
    platform: gpio
    pin:
      number: GPIO03
      inverted: true
sensor:
  - platform: hlw8012
    model: BL0937
    sel_pin:
      number: GPIO12
      inverted: true
    cf_pin: GPIO04
    cf1_pin: GPIO05
    current:
      name: "HLW8012 Current"
    voltage:
      name: "HLW8012 Voltage"
    power:
      name: "HLW8012 Power"
    energy:
      name: "HLW8012 Energy"
    update_interval: 10s
    change_mode_every: 3